A DRC VAT invoice needs three things on top of a normal VAT invoice: a note saying the reverse charge applies and the customer must account for the VAT, the amount of VAT due (or at least the rate), and a total that does not include that VAT. HMRC's suggested wording is as simple as "Reverse charge: customer to pay the VAT to HMRC". Get those right and the invoice is fine. Get them wrong and the QS will send it back, or worse, pay it wrong.
Below is exactly what HMRC expects, a sample layout you can copy into your own template, and the mistakes we see most often when a domestic reverse charge invoice lands on our desk.
What a DRC VAT invoice must show
Start from a normal VAT invoice. All the usual details still have to be there: your business name, address and VAT number, a unique invoice number, the date, the customer's name and address, a description of the work, the net amount and the VAT rate. HMRC's technical guide then adds three requirements for reverse charge work:
- a note making it clear the domestic reverse charge applies and that the customer is required to account for the VAT
- how much VAT is due under the reverse charge, or, if that amount can't be shown, the rate of VAT
- the VAT must not be included in the amount charged to the customer
There's one more detail that's easy to miss. HMRC says the VAT regulations require invoices for reverse charge services to include the reference "reverse charge". So wording that only quotes the legislation, without those two words, is weaker than it needs to be. Put "Reverse charge" at the front and you've covered it.
Reverse charge invoice wording HMRC accepts
HMRC gives these examples in its guidance, and they're what we'd use:
- Reverse charge: VAT Act 1994 Section 55A applies
- Reverse charge: S55A VATA 94 applies
- Reverse charge: Customer to pay the VAT to HMRC
Our preference is the last one. It's plain English, and the person approving invoices at the main contractor's office knows exactly what it means without looking anything up. If your software can't show the VAT figure (some older systems can't), HMRC's manual allows you to say the VAT is to be accounted for by the customer at the standard rate instead, with a note along the lines of "customer to account to HMRC for the reverse charge output tax on the VAT-exclusive price of items marked reverse charge".
A sample domestic reverse charge invoice
Here's how the numbers should sit on a straightforward invoice from a VAT registered electrical subbie to a main contractor. The figures are an example only.
Sample invoice: Sparks Electrical Ltd to Main Contractor Ltd
Invoice 1043, dated 30 November 2026. Our VAT no. GB 123 4567 89. Job: Unit 4, first fix electrics, application 3.
| Amount | |
|---|---|
| Labour | £6,000 |
| Materials (cable, containment, boxes) | £2,000 |
| Net total | £8,000 |
| VAT at 20%: reverse charge, customer to account | £1,600 |
| Total due (excluding reverse charge VAT) | £8,000 |
Reverse charge: Customer to pay the VAT to HMRC. VAT Act 1994 Section 55A applies.
Notice the total due is £8,000. The £1,600 is on the page, labelled, but it isn't added in. If the main contractor makes a CIS deduction, it comes off the labour figure when they pay (20% of £6,000 is £1,200, so they'd pay £6,800). The deduction then shows up on the monthly CIS payment and deduction statement → rather than needing to be on your invoice, though plenty of subbies show it as a memo line so the cash reconciles.
Five invoice mistakes that cause trouble
1. Adding the VAT into the total anyway
The most common one by a distance. The wording says reverse charge, but the total still includes the 20%. Now the invoice contradicts itself. If the main contractor pays the gross figure, you've collected VAT you're not entitled to charge, and they can't reclaim it as input tax. Somebody has to unwind it with a credit note and a fresh invoice.
2. Using reverse charge wording for the wrong customer
The note goes on invoices to VAT and CIS registered customers who sell your work on. It does not go on invoices to a homeowner, or to a customer who has told you in writing they're an end user. Those get a normal VAT invoice with VAT charged. Keep the end user letter on file next to the job.
3. Reverse charging zero rated work
If the job is a qualifying new dwelling and your work is zero rated, there's no VAT to reverse. The invoice shows VAT at 0% and no reverse charge note. We see subbies who work mostly on housing sites stick the reverse charge wording on everything by default. Our guide to VAT on new build houses → explains when zero rating really applies.
4. Splitting labour and materials onto separate invoices
Some firms try to put materials on one invoice with VAT and labour on another under the reverse charge. HMRC says charges for labour and the materials used in that labour shouldn't be separated to avoid the reverse charge, and that a single supply and fix order stays within it for the full value even if you issue separate invoices. One job, one treatment.
5. Leaving the VAT figure off entirely
An invoice that says "reverse charge" but shows no VAT amount or rate leaves the customer to guess. They might guess right. Show the figure.
Applications for payment and self-billing
A lot of construction billing runs off applications for payment rather than invoices, with the main contractor's payment notice or a self-billed invoice following on. The same principles apply to whichever document is the VAT invoice. If the main contractor self-bills you, their document has to carry the reverse charge note. HMRC's manual gives self-billing wording such as "Reverse charge: We'll account for and pay output tax of £[amount] to HMRC".
Check what the self-bill actually says before you bank the money. If it shows VAT added and paid to you, that's wrong under the reverse charge and it needs correcting. If it's a pure application with no VAT invoice behind it, make sure you know which document is going to be the tax invoice so you issue it correctly.
What if the customer ignores the wording?
Occasionally a customer pays a DRC VAT invoice gross, VAT and all, because their accounts team keyed it wrong. Don't just pocket the difference. Tell them, refund or credit it, and keep a note. On the other side, if you're the customer and a supplier sends you a normal VAT invoice when the reverse charge should apply, HMRC's position is that you're still responsible for applying it. It's your problem as well as theirs.
If you'd like to see these invoices laid out alongside the matching VAT return entries, our worked reverse charge examples → go through five common jobs.
Frequently asked questions
What wording should go on a reverse charge invoice?
HMRC suggests wording such as 'Reverse charge: Customer to pay the VAT to HMRC' or 'Reverse charge: VAT Act 1994 Section 55A applies'. The regulations require the reference 'reverse charge' on the invoice.
Do I show the VAT amount on a DRC invoice?
Yes. Show how much VAT is due under the reverse charge, or the rate if you can't show the amount, but don't include it in the total the customer pays.
Can I put materials on a separate invoice with VAT?
No, not for a single supply and fit job. HMRC says labour and the materials used in it shouldn't be separated to avoid the reverse charge, and the full value stays reverse charged.
What happens if my customer is sent a normal VAT invoice by mistake?
The invoice should be corrected with a credit note and a reverse charge invoice. HMRC holds the customer responsible for applying the reverse charge even if the supplier's invoice was wrong.
Want your invoice template checked?
Book a free, no obligation discovery call. Send us a recent invoice beforehand and we'll tell you whether it meets HMRC's reverse charge rules and what to change.
Schedule a CallThis article is general guidance for building contractors, not advice for your specific situation. Always review your own circumstances with your accountant before acting.
← Back to all articles